Precautions for using constant temperature and humidity machines in the electronics industry

1. Clean the appearance of the constant temperature and humidity machine. Clean with regular water or replace corrosive liquids with soapy water. The ground around and at the bottom of the box should also be kept clean. Clean the outside of the box at least once a year to reduce dust.

2. Clean the workspace of the constant temperature and humidity machine. Before operating the constant temperature and humidity machine, impurities inside should be cleaned thoroughly, and the distribution room should be cleaned at least once a year to prevent dust in the air from adsorbing on the surface of the air conditioner or accessories such as condensers and evaporators. After cleaning, the air conditioner body should be dry and kept dry.

3. The front is used to clean the exterior of the air conditioner body. As the main components of a constant temperature and humidity machine: the condenser, copper tube, evaporator, compressor, and other refrigeration systems, it is necessary to pay attention to regular cleaning and timely cleaning of dust. The condenser is maintained monthly according to the plan, and the dust attached to the cooling network of the condenser is cleaned with a vacuum cleaner or brush, or sprayed with high-pressure air. This can prevent equipment overpressure, overload, and other phenomena. Check for oil leakage in copper pipes, functional joints, and welded joints. If there is any leakage, it should be dealt with promptly.

4. Regularly check the circuit breakers and overtemperature protectors in the constant temperature and humidity machine. Protect air conditioning and machine operators.

5. The water storage tank of the constant temperature and humidity machine is replaced once a month and can only be used with water. The humidification water tray should also be cleaned once a month to ensure smooth water flow. In addition, pay attention to the appropriate replacement of wet gauze. It is recommended to replace it every three months. Therefore, the cleaning and maintenance work of constant temperature and humidity air conditioning cannot be underestimated. The operator should regularly clean and maintain all accessories of the air conditioner in order to provide us with good work and service life.